Microtube-image

MICROTUBE Micro Bore Medical Grade Heat Shrink

The Micro Tube heatshrink tubing product range is available in three material types; two have FDA USP Class VI approval. These are KBM100 and TWBM100. This will be of interest to compact active medical device manufacturers, requiring a high shrink ratio micro bore tubing. Micro Tube is also available in the commercial material type PLK175; all three sleeving material types are ideal for electrical insulation, mechanical protection and strain relief where a micro bore construction is required.

To buy or find out more about this product, please complete the enquiry form below.

Enquiry Form

  • This field is for validation purposes and should be left unchanged.
SKU: MICROTUBE Category: Tags: , ,

The MicroTube heatshrink tubing product range is available in three material types; two have FDA USP Class VI approval. These are KBM100 and TWBM100. This will be of interest to compact active medical device manufacturers, requiring a high shrink ratio micro bore tubing. Micro Tube is also available in the commercial material type PLK175; all three sleeving material types are ideal for electrical insulation, mechanical protection and strain relief where a micro bore construction is required.

Technical Data

Operating temperature rangeKBM100 -55°C to 175°C
TWBM100 -40°C to 105°C
PLK175 -55°C to 175°C
Installation temperature:
Minimum full recovery temperature
KBM100 175°C
TWBM100 140°C
PLK175 175°C
SpecificationsTechnical data and specifications on the three material options are available on the individual material type data sheets. Please contact the PMG Sales Office.

Ordering Details

Ordering SizeMinimum ID Supplied (mm)Maximum ID Recovered (mm)Supplied Wall Thickness (mm) NominalMaximum Recovered Wall Thickness (mm)
MT-No.10.3560.1780.0760.127
MT-No.20.6100.3050.00640.152
MT-No.331.1430.4320.0640.118
MT-No.650.6350.2540.1270.330

Standard colours: Black and transparent.

Operating temperature rangeKBM100 -55°C to 175°C
TWBM100 -40°C to 105°C
PLK175 -55°C to 175°C
Installation temperature:
Minimum full recovery temperature
KBM100 175°C
TWBM100 140°C
PLK175 175°C
SpecificationsTechnical data and specifications on the three material options are available on the individual material type data sheets. Please contact the PMG Sales Office.

Ordering Details

Ordering SizeMinimum ID Supplied (mm)Maximum ID Recovered (mm)Supplied Wall Thickness (mm) NominalMaximum Recovered Wall Thickness (mm)
MT-No.10.3560.1780.0760.127
MT-No.20.6100.3050.00640.152
MT-No.331.1430.4320.0640.118
MT-No.650.6350.2540.1270.330

Standard colours: Black and transparent.

Additional Information

Colour

Black

Supplied Diameter (mm)

2.00, 1.00, 3.00, 6.00