PLCE100A Heat shrink End Caps

PLCE100A Heat Shrink End Caps

£0.40£1.60

PLCE100A heat shrink end caps are commonly used to seal the ends of plastic, rubber, or paper insulated wires and cables.  They are manufactured from a modified polyolefin material and internally lined with a hot-melt adhesive to provide a watertight seal against the damage of moisture, dirt or corrosion.

Clear

PLCE100A Heat Shrink End Caps

PLCE100A  end caps are commonly used to seal the ends of plastic, rubber, or paper insulated wires and cables.  They are manufactured from a modified polyolefin material and internally lined with a hot-melt adhesive to provide a watertight seal against the damage of moisture, dirt or corrosion.

Theses caps will provide a seal at up to 0.05 Mpa internal pressure, whilst operating at temperatures between -55ºC to +110ºC.  Their ruggedized and extremely durable wall makes them exceptionally hard wearing and gives, promoting excellent abrasion and cut through resistance

Key Features

Up to 0.05Mpa Internal Pressure
Continuous Operating Temperature -55°C to +110°C
Optional Adhesive Liner
Good Chemical and Abrasion Resistance

Ordering

Ordering Size (mm)Minimum ID Supplied (mm)Maximum ID Recovered (mm)Length as Supplied (mm)Recovered Wall Thickness (mm)
10/410.04.030.02.0
14/414.04.530.02.0
25/825.08.050.02.3
35/1535.015.080.03.0
55/2555.025.0130.03.3
75/3575.035.0140.03.3
100/50100.050.0140.04.0
120/60120.060.0123.03.8

Technical

General
Installation temperature
Low temperature flexibility
125°C 14Mpa
Electrical
Dielectric strength
15kV/mm minimum
Thermal
Heat ageing
Elongation at Break
168 hours at 150°C
>300%
Flammability
Flame retardant
Chemical
Fluid resistance
Fuels
Hydraulic fluids
Oils 23°C to ISO1817
Specifications
RoHS Compliant

Standard colour: Black
Full details on technical specifications, test methods and values are available on request.

Additional Information

Supplied Diameter (mm)

10.0, 100.0, 120.0, 14.0, 145.0, 158.0, 25.0, 35.0, 55.0, 75.0