PPS-ACR Acrylic coated braid

PPS-ACR Acrylic Coated Braided Sleeving

£3.29£8.45

PPS-ACR IS an acrylic coated braided glass sleeving that is Class F (155°C) rated and commonly used in the manufacture of motor vehicle wire harnesses.

Clear
SKU: PPS-ACR Category: Tag:

PPS-ACR acrylic coated braided sleeving is Class F (155°C) rated and commonly used in the manufacture of motor vehicle wire harnesses.

PPS-ACR is constructed from textile glass and a specially developed impregnation of PU-acrylic resin that has been woven to form a braided sleeve. The combination of these two polymers allows the product to be used for electrical insulation in many applications requiring high thermal and mechanical demands.

PPS-ACR Acrylic Coated Braided Sleeving is used in motor vehicle wiring harness manufacture for the bunching, consolidation and protection of cables. This product is a;llso widely used for the insulation of winding lead outs and joints on Class F rated (155°C) induction motors and alternators. It is also used extensively on transformer/choke winding lead outs.

Resistant to high temperature, aggressive fluids and gases.
Electric strength – 2.5kV
Temperature rating – Class F (155°C continuous opersating temparature)
Short term exposure up to 200°C.
Available in diameters of 0.5mm – 20mm
Self-extinguishing
Standard colours – black and yellow
The specially formulated acrylic resin coatings are applied as aqueous solutions and hence the sleeving manufacturing process has no significant environmental hazard.

Technical Data

Maximum Operating Temperature200°C Flash Exposure – 155°C continuous
Flame resistanceself-extinguishing due to UL 94 V0 rated materials
Electric Strength2.5kV Insulation Resistance
Dimensionsstandard nominal diameters 0.5 – 20 mm; endless manufactured; supplied in coils or on reels
Physical AttributesElectrical breakdown voltage ~2.5 kV, colours available on request
chemical resistanceExcellent resistance against transformer oils, fuels and lubricants. High resistance against water, cleaning agents and salt spray fog.
Standards ApplicableIEC 684-3-404
ASTM D-372
NEMA VS-1 – Grade C1 2.5kV

Additional Information

Colour

Black, Yellow

Supplied Diameter (mm)

2.00, 4.00, 6.00, 8.00

Length

5